GENERAL DESCRIPTION The ft690V / M is a mono Class-AB audio power amplifier designed for demanding applications in mobile phones and other portable media devices. It is capable of delivering 1.0W of continuous output power to an 8Ω BTL load with less than 1% distortion (THD + N) from a 5VDC power supply. The ft690V / M is specifically designed to provide high quality output power with a minimal number of external components. The ft690W does not require output coupling capacitors or bootstrap capacitors, and is therefore ideal for use in mobile phones and other low voltage applications where minimal power consumption is a primary requirement. The ft690V / M features a low-power shutdown mode. In the shutdown mode where a logic low is applied onto the SD pin, the amplifier is completely turned off and no supply current will flow through the device. It also features advanced pop & click circuitry which eliminates noise which would otherwise occur during turn-on and turn-off transitions. The ft690V / M is unity-gain stable and can be configured by external .?? gain-setting resistors APPLICATIONS Mobile phone MP3 / 4 player Portable electronic devices FEATURES Output Power -?? 1W (8Ω, 5V, 1% THD + N) -? 360mW (8Ω, 3V, 1% THD + N) PSRR : 64dB (typical) at 217Hz THD + N:?? 0.05% at 1kHz (5V / 8Ω / 0.5W) Quiescent current: 3.5mA at 8Ω Shutdown current:? 0.1μA (typical) Improved pop & click circuitry eliminates noise during? turn-on and turn-off transitions Wide input voltage range:? 2.5V ~ 5.5V No output coupling capacitors, snubber networks or bootstrap capacitors required Unity-gain stable External gain configuration capability Available packages:???? DFN3X3-8L and MSOP -8L APPLICATION CIRCUIT Figure 1: Typical Audio Amplifier Application Circuit DFN3X3-8L MSOP-8